VR Spectator

This article explores the use of VR Spectator - an Igloo tool used to spectate someone's virtual world

Instructions

Prerequisits

• Have a HMD device installed and running, with the startup tutorials and settings configured.
• Have an Igloo, with a complete software suit.
• Have a fast, 1Gb/s switch between the HMD machine and the igloo machine.

Opening the content

1. On the Media Server
   1. Open Igloo Warper
   2. Open Igloo Control
   3. Open Igloo Capture
2. Open the game-engine content piece on the VR PC
   
   1. Ensure that is has access to the public and private firewalls
   2. Ensure that the -iglooCameraType Unwrap and -setNDI command line arguments are in place, ref: This Guide

 Displaying the content

1. In Igloo Capture, create a new input, selecting NDI as the source
   
   
   
   
2. Select the NDI source IglooUnwrapNDICam, and then click Finish
   
   
   
3. Using the CaptureInputs tab on TouchOSC, select the relevant Capture Input, and select Enable
   
   
   

Related articles

• Page:
  Winter 2021 - VR Spectator
• Page:
  Connecting an NDI device on a separate subnet using NDI Access Manager
• Page:
  Igloo content folder permissions
• Page:
  Enabling NDI protocol on the network
• Page:
  VR Spectator