Winter 2021 - Igloo Annotation (Igloo Touch)

Igloo Touch and any supporting Igloo Core Software releases are still in development. Anybody with early access to these builds should be aware that these builds may be unstable and may include some untested functionality. Please only install under guidance from an Igloo representative.

Software required	Release Version (if applicable)	Icon

Software required	Release Version (if applicable)	Icon
Igloo Warper	1.17.0
Igloo Control	1.41.0
Igloo Touch	1.1 (DEV)
Igloo Controller Service

Igloo Touch is the preferred tool to make use of the Igloo annotation feature. This will cover configuring Igloo Touch and using it to annotate on the Warper.

Ensure Igloo Warper, Igloo Control and the Igloo Controller Service are all running on the media server
Open Igloo Touch on an IOS Device
Navigate to the Settings tab
Select Main Settings
Set the Controller Service IP to the IP address of the media server
Return to Igloo Touch, and enter the annotation tab
Press the standby button in the bottom left. A cursor should appear on the warper canvas.
Adjust the colour and cursor size to taste
Press on the touchpad to annotate the screen. Turn the phone to control the cursor location
Use the undo button to remove the previous annotation
And the redo button to reinstate it

Igloo Touch and any supporting Igloo Core Software releases are still in development. Anybody with early access to these builds should be aware that these builds may be unstable and may include some untested functionality. Please only install under guidance from an Igloo representative.