Document toolboxDocument toolbox

Private & Confidential

Blackmagic

Igloo Core Engine has support for the Blackmagic cards which are compatible with the Blackmagic Desktop Video drivers. These cards include the Decklink and Intensity series. The Blackmagic Layer enables users to select from available video inputs to initialise video capture.

Setup

  1. Create a new Blackmagic layer. From the toolbar navigate to Layer > Add Layer > Blackmagic

  2. With the Blackmagic layer selected in Igloo Core Engine, you will see a list of available video inputs for your capture card within the Layer properties panel.

  3. Simply select the input you wish to capture from. You can change this selection at any point.

  4. Once the input is selected, the software will initialise video capture from that input.

Troubleshooting

Should you encounter any issues while using a Blackmagic capture card in Igloo Core Engine, please take the following steps:

  1. Ensure that the capture card is correctly installed and recognised by your system, this can be verified within windows device manage and the Blackmagic Media Express application.

  2. Check that the appropriate drivers for the card are up-to-date.

  3. Make sure the video source connected to the selected input of the capture card is sending out the signal correctly

(c) Igloo Vision 2020