Summer 2022 - Igloo Audio Engine

Allows the definition of a delay between the audio and visuals, and allows the configuration of the Igloo Audio Engine. The menus below are available in the Igloo Warper, Igloo Web and Igloo Capture.

The Sources menu shows the available audio output sources from the Warper. Individual audio levels can be defined:

Channel mappings allows the manipulation of audio channels - here the audio channels from the warper can be mapped to different speakers. This would allow for a stereo repeat to “up-mix” 2-channel content to a 6 speaker system, for instance.

Output device defines which device the warper passes audio to. If no device is chosen, the Windows default device will be used. Test tone output in this menu also allows a test tone to be sent to each channel, allowing for the identification of channels & speakers.

Master Volume allows the volume for the entire application to be changed, as opposed to the clip volume seen in Igloo Playback.

AVSync allows a delay to be set on the audio output, which can help rectify AV Syncing issues

Use this if your speakers are extremely far away from the screen