Application Use

Once a remote access connection has been established to the relevant Igloo Media Server and the Igloo Remote Warper has been installed open Igloo Warping Tool from the Start Menu, or the Desktop Shortcut if one was created:

If a Pan, Tilt, Zoom (PTZ) camera has not been installed an assistant at the location where the Igloo Immersive Environment has been installed will be required to relay a live video stream via a tablet or phone camera.

The Igloo Warping Tool interface is based upon the TouchOSC interface and works in a similar manner, see below:

Handles are provided in each corner to adjust the top or bottom and side warp grids in order to correct the projected images with relation to the projection screen installed.

Once correctly configured up to 3 sets of Warp Grids can be saved and subsequently loaded, via the Save and Load menu options.

This can be useful when providing training whereby valid settings can be quickly saved and restored after the training to return the projection environment to a configured state.