The Model Viewer Pro is a Unity Based application which has been designed to seamlessly import and display a wide range of 3D model formats, and supports both 2D and 3D projection. This is a licensed piece of software requiring a Cryptlex license to run.
Installing & Starting The Model Viewer
Download from here, and run the installer.
Formats
The model viewer supports the below formats:
Please note these haven’t been extensively tested yet. There is also a work in progress USD(Z) importer.
How to load a model
To load a model in you simply click the “Load Model from File” button at the top on the server display. After which you will shown a file browser to navigate to the desired location.
Features
Load Model from File - Loads the desired 3D model from a location on the server.
Save Placement - Saves the rotation and scale of an object. (Will automatically load if the object is loaded back into the scene)
Load Skybox from File - Load a HDRI file as the skybox.
Object Scale - Change the scale of the object uniformly (x,y,z)
0.1x - Scale factors of 0.1-1.
10x - Scale factors of 1-10.
100x - Scale factors of 10-100.
Rotate - Quick rotate buttons.
X - Spin the object in the X axis 90 degrees.
Y - Spin the object in the Y axis 90 degrees.
Z - Spin the object in the Z axis 90 degrees.
Start Streaming - Allows for the Model Viewer to be controller from ICE Control Panel with a mouse and keyboard and same controls. This will need to be setup as an app in ICE Control Panel as a custom browser in custom_browers:
"ModelViewerPro": {
"name": "Model Viewer Pro",
"url": "$remoteIP/receiver/index.html",
"https": false,
"icon": "$ai/image.png",
"description": "Model Viewer Pro"
}
Controls
X - Scaling mode (Press once to enable, and again to disable)
Scaling mode - Wherever you are pointing your device becomes your “zero value”, tilting or aiming the device upwards will increase the scale of the object, and tilting or aiming the device downwards will decrease the scale based on how far you stray away from the zero value.
Y - Not used
A - Enabled lock to device rotation.
B - Disable lock to device rotation.
Device rotation - How you move your device will be how the model moves (if you turn your device to the left, the model will turn to the left)
Movement - As is with every other Igloo application.
Need any help?
Contact the support desk or jon@igloovision.com
0 Comments