Controls when using a Headset

General Interactions

1. On first entry you should see a blank 6m Cylinder, this is our most popular structure and serves as a good starting point.
   

1. To change to a different Igloo structure, you will need to move around the room. To do this, look at your controller, it will indicate the correct button to press to teleport around the room.
   Press and hold this button to create a teleport "jump", then let go to "jump" to the highlighted location.
   
   
   Move towards a wall of pictures, which will illustrate each structure you can visualize. Move close and adjascent to a picture and hold out your controller until it the button turns yellow, then click the rear trigger on the controller to select that Igloo structure.
   
2. You can also navigate further around the room to survey the entire Igloo structure, you are able to teleport to various locations, and even onto the 2nd floor within the room.
   
   
   You can get a good view of your selected igloo structure from the 2nd floor!
   
3. To play some content within the dome, press the Oculus/Vive home button, and select the Desktop Viewer.
   This is built into both systems and allows the user to interact with their desktop using their VR controllers from inside the headset.
   
   
   Pull Igloo control to the front, and select the content you would like to run. This will then play onto the Warper, which in turn will appear inside
   the Igloo structure you have active. Please note: switiching structure does not stop the playback.
   

Controls without using a headset

General Interactions

1. On first entry you should see a blank 6m Cylinder, this is our most popular structure and serves as a good landing point.
   

   Content

   The black screen is just because no content is playing. When there is content playing you will be able to see it.

2. To change the structure to a different Igloo, navigate outside and look for the wall of pictures. You can then click on and select the igloo structure you would like to view in the show room.
   
3. You can also roam around the room, to get a better idea of the structure and its dimensions.
   
4. If you play a clip using the Igloo Control application, you will then be able to see it inside the structure.
   

Keyboard Shortcuts

To help with development, and instances where you may not be using an Oculus Rift, or HTC Vive, we have created a debug mode where you can use the following keyboard commands, as well as your mouse, to move and interact with the IglooShowroom program.

In addition to this guide, these commands are displayed in the active game window.