Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

ICE can display its canvas, or parts of the canvas, on additional windows.

At some point you will want to route the Canvas from Igloo Core Engine out of your computer, ideally to a really big screen. This can be achieved by configuring one or more Screen windows, and optionally Warping and Blending the output within those windows.

Tip

The Igloo Setup Tool automatically generates the Screen Window and Warping Setting files for you

Screen Window Settings

Window Settings are configured in the ScreenWindowSettings.xml, typically found at

C:\ProgramData\Igloo Vision\IglooCoreEngine\settings

One of or more Windows can be configured, with each Window displaying a subsection of the Workspace Canvas.

Code Block
languagexml
<windows>
    <window>
        <winXPos>1920</winXPos>
        <winYPos>0</winYPos>
        <winWidth>1920</winWidth>
        <winHeight>1080</winHeight>
        <startX>0.000000000</startX>
        <startY>0.000000000</startY>
        <subWidth>0.000000000</subWidth>
        <subHeight>1.000000000</subHeight>
    </window>
	<window>
        <winXPos>3840</winXPos>
        <winYPos>0</winYPos>
        <winWidth>1920</winWidth>
        <winHeight>1080</winHeight>
        <startX>0.500000000</startX>
        <startY>0.000000000</startY>
        <subWidth>0.500000000</subWidth>
        <subHeight>1.000000000</subHeight>
    </window>
</windows>

...

The height of the canvas subsection to be drawn into the window, in normalised coordinates i.e. 0-1

  • stereoFormat

The stereo output setting for individual windows, The possible values for this tag are:

0 : Top-Bottom

1 : Side-by-Side

2 : Left Eye Only

3 : Right Eye Only

Examples

This example assumes you have one 1920x1080 screen and you want to display the entire canvas on this screen.

...

This example assumes you have two screens each 1920x1080, and you want to display the left half of the canvas on Screen 1 and the right half on Screen 2.

...

Output Warp

The Warping and Blending can be applied to the Output Windows to alter the geometry and blending between projectors to create a seamless image. Igloo Core Engine Supports a number

Igloo Setup

The Igloo Setup can be used to generate Warp & Blending files which are applied to Igloo Core Engine’s Output windows as well as other configuration settings.

See Igloo Setup for more info on the Igloo Setup tool

Scalable Warp & Blend

Igloo Core Engine supports warp and blend through the integration of the Scalable SDK. Scalable Display Technologies

Scalable settings are configured in the EditorWIndowSettings.xml, found at

C:\ProgramData\Igloo Vision\IglooCoreEngine\settings

Code Block
<warpType>2</warpType>
<Scalable>
	<outputResX>15360</outputResX>
	<outputResY>2160</outputResY>
	<invertOutputY>0</invertOutputY>
	<Mesh>
		<filePath>C:\ProgramData\Igloo Vision\IglooCoreEngine\warping\Cylinder\ScalableDataOrthographic.ol</filePath>
		<invertInputY>1</invertInputY>
		<inputRect>
			<startX>0</startX>
			<startY>0</startY>
			<width>1</width>
			<height>1</height>
		</inputRect>
		<outputRect>
			<startX>0</startX>
			<startY>0</startY>
			<width>1</width>
			<height>1</height>
		</outputRect>
	</Mesh>
</Scalable>

Igloo Warper (Legacy)

The Igloo Warper application can be used to generate Warp & Blending files which are applied to ICE’s Igloo Core Engine’s Output windows.

Note

Requires Warper version 1.20.x +

Within the Igloo Warper’s menu navigate to Config > High Performance Warping > ICE I C E > Export Warping file.

...

The export may take some time depending on the number of displays and their resolution. Once finished, the Warping files are saved to C:\ProgramData\Igloo Vision\IglooCoreEngine\warping

...

This file is not really a bitmap but lookup table for the X,Y coordinates of the warped image.

  • Screen-edgeBlend.bmp

Canvas Mask

When required, the Igloo Setup Tool will export an additional mask canvasMask.png which is applied to Canvas space rather than Screen space. This file should be moved to

...