Versions Compared

Version Old Version 5 New Version Current
Changes made by

Zeeshan Nehal

Dean Cousin

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Tablet/Ipad uses the Touch OSC application which communicates through wireless networks using the OSC protocol to control Igloo Applications running on an Igloo Media ServerIgloo utilises the third-party application TouchOSC (Developed by Hexler) to control the various Igloo applications over the OSC messaging protocol. Adding new/updated TouchOSC layouts will need to be synced from the media server for layout updates. Please allow UDP 8000-8020, 9000-9020, 10000 inbound \ outbound connection in the firewall settings. Make sure two way communication is possible for Ipad remote devices to be able to send and receive OSC messages from media server.

...

Host Name

Machine IP

Machine Address 

Scope

Description

mediaServerName

136.186.118.11 (x.x.x.x)/dhcp

mediaServerName.domain.com

Igloo Network, Outside

(optional)

OSC Protocol

Instructions

The following are the step guide to test the touchOSC layout updates are working or not. is a guide to putting new layouts on a remote device using TouchOSC Editor’s sync function:

Open the TouchOSC Editor application in the media server.

  2. Select a touchOSC file by clicking on open button >  navigate to the path “C:\igloo\TouchOSC” or “C:\ProgramData\Local\Igloo Vision\IglooWarper\touchOsc\IglooTabletControl-2x2-v1.16.1.4.touchosc”selecting Open and navigating to the file to be synchronised with the remote device. Sample files can be found in the Warper’s install folder.

  3. Select the sync button in the TouchOSC application and pop-up window will appear stating about layout add to the  TouchOSC device/ Ipadwith instructions.

  4. Open the TouchOSC application in Ipad on the remote device and tap on circle button that takes to opens the settings page.

  5. Tap the layout in the application

    Image Removed

  6. Tap on the AddSelect layout and make sure the OSC address is the media server IP address.

    Image Added

  7. Select add (IOS)/add from editor (android)

  8. Media server name appears under the found hosts and tap on that.

  9. The new layout appears and tap on that which will be selected as TouchOSC layout.

  10. Verify new layout is working and able to get information from media server.

  11. Run the Igloo Warper and Igloo control application (both in start menu) on the media server.

  12. Click Clicking on the Clips tab of the ToucOSC TouchOSC app and tap on Bank>1, now you will be able to see the clip names hereclicking on Bank>1should populate the clip banks in TouchOSC with the filenames of any clips loaded into Igloo Control. If you are not able to see the clip bank names that means network communication is not workingthe remote device is unable to receive information from the media server.

...