...
The following command line arguments can be used'
| argument | use |
|---|---|
| -igloo3DEnabled |
...
| Enables 3D Mode on start |
...
| -iglooSpoutReset |
...
| Enables sending a reset message '/spout/reset' via OSC on creation to port 9001 |
...
| -iglooSenderName |
...
| [NAME] |
...
| Where the following [NAME] argument specifies the spout sharing name |
Camera Configurations, only one of the following should be specified at a time.
...
| -iglooCameraType [NAME] | Where the following [NAME] argument specifies the type of camera and must be Cylinder Cube Unwrap Cylinder6 ImmersiveRoom4 |
| -setNDI | Sets the output mode of all camera systems to NDI rather than Spout |
| -setVsync0/1/2 | Set's vsync count in quality settings |
| -setTargetFPS | Set's the fps target, default is 60 frames per second. |
| -iglooFOV [NAME] | Where [NAME] argument specifies the FOV type. Standard Wide SuperWide |
| -setResolution 7680x500 | ImmersiveRoom4 only sets the resolution for the system. Default is 7680x500. |