Versions Compared

Version Old Version 14 New Version Current
Changes made by

Stu George

Zac Herd

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Port

Scope

Description

Source

Endpoint

TCP 4352 Inbound

TCP & UDP 3620 Inbound

Igloo Network

Projector communications and control.

IMP/Media Server

Projectors

UDP 9000-9020, 10000 Inbound

Igloo Network, Outside (Optional)

OSC Protocol.

IMP/Media Server
Tablet

Tablet
IMP/Media Server

UDP 5353, 5960 - 65535 Inbound

Igloo Network, Outside (Optional)

NDI Discovery, Messaging and Video Streaming

IMP/Media Server
Specific NDI Senders (NDI Connect Spark, BirdDog PTZ cameras etc)

IMP/Media Server

TCP 9011

Igloo Network

Igloo Home

Igloo Home Web client

IMP / Media Server

TCP 8086

Igloo Network

Peruse-a-rue application.80, 443

Outside

Street View Service

IMP/Media ServerIMP/Media Server

Internet (Google API)

TCP 3000

Igloo Network

Matterport application.

IMP/Media Server

IMP/Media Server

TCP 3001

Igloo Network

GeoCV application.

IMP/Media Server

IMP/Media Server

UDP 9001, 9010, 10000

Igloo Network

Igloo Controller Service.

Tablet/IOS device running Igloo Touch

IMP/Media Server running Igloo Controller Service

TCP & UDP 53, 80, 443 Outbound

Outside

DNS, web connectivity and Windows updates.

IMP/Media Server

DNS Server(s)
Windows Update Servers
Internet

TCP 80, 443, 8200 Outbound

Outside

GoToMyPC Remote access.

IMP/Media Server

GoToMyPC

TCP & UDP 5938 Outbound

Outside

TeamViewer Remote access

IMP/Media Server

TeamViewer

UDP 162, 319-320, 2203, 4321, 14336-14600, 4440, 4444, 4455, 5353, 8700-8706, 8800, 8751, 16000-65536 Inbound

Igloo Network

Required if using Dante Audio and Controller. Allows audio routing, clocking, control, monitoring, and related services. See Dante Audio section below for a detailed description of these ports.

Dante Senders (Typically, IMP/Media Server, Dante enabled DSPs)

Dante Receivers
(Typically, Dante enabled DSPs, Dante network interfaces)

TCP 6789, 6790

Igloo Network

Birddog camera WEB GUI using these ports to access the Birddog device configuration page.

Birddog camera

Web GUI/IMP

UDP 1511

Igloo Network

Optitrack data port

Optitrack motion capture

Motive Software / IMP

TCP 27036 Inbound

Igloo Network

TouchOSC Editor. Required for synchronising TouchOSC layouts from the editor to remote devices.

IMP/Media Server

Remote devices (tablets, phones etc)

Remote devices (tablets, phones etc)

IMP/Media Server

Info

Note that many of the ports above are localised to a single subnet / security zone (including Dante and NDI multicast traffic). This traffic is only expected to hit the firewall in cases where multicast proxying is configured. By default this is not the case and these ports do not need opening.
A security gateway installed by Igloo will be configured appropriately, and any other requirements can be planned for involving our network and security teams.

Internet Connectivity

As shown in the above table, ports for web connectivity are optional but preferred for Windows Updates, remote support, and general usability. Windows Updates should generally be allowed and installed for security fixes, though a day should be set aside for larger cumulative and feature updates that may require post-install testing.

...