Oculus have released the Quest2 Air-link, which coupled with a high speed wifi connection allows the use of Oculus Rift applications via a VR ready gaming PC, over wifi, using the Quest2.
This entire process is in Beta mode, but it does away with the Quest2 Link Cable, a $90 accessory that teathered the Quest to a VR ready PC.
Prerequisits
Hardware
5Gz Capable wifi router, within 20ft of Oculus at all times
Accounts
Facebook Account or Oculus Account
Steam Account
Software
Igloo Showroom
Setup Procedure
...
Install all the relevant software:
- Oculus Desktop Software
- Steam
- Steam VR
- Igloo ShowroomSetup the Quest2 Air Link
Ensure your Quest2 is on the same Wifi as your VR Ready PC
Start the Oculus App, and proceed through the wizard selecting Quest2 as your device, and Air Link as the connection.
Put on your Quest 2 headset and press [Oculus button] to open the universal menu.
Select [Gear icon] Settings then select Experimental Features.
Find and select the button next to Air Link.
Read the Air Link Requirements then select Continue.
Find and select your PC in the Available PCs list then select Pair.
Once pairing is complete you can now click Launch.
After you've paired for the first time, you can turn on Air Link from your Quick Actions menu in Settings.
At this point, restarting Steam VR with Airlink Active should launch the Steam VR app, and the view inside the headset should change to the Steam VR Landing page.
You can then start your Igloo Showroom.
You should also see that the Steam VR window has a Quest2 device
Best Practices
Have your PC connected to Router/Access Point via Ethernet cable
Headset should be connected to Wi-Fi via 5GHz band (AC or AX)
Router in the same room as the headset or in line of sight, and at least 1 m off the ground
Non-mesh network configuration
Known Issues
My setup is ideal, but the performance is not good.
Air Link's performance might be affected if the Wi-Fi channel switches from 5 GHz to 2.4 GHz during a session. To avoid this behaviour, you can either create separate networks for the 2.4-GHz and 5-GHz bands, or disable the 2.4-GHz band altogether. Please consult the manual of your router for more information.
How do I unpair your headset connected to my PC?
Right now, there is no option to unpair the headset from the PC. The way to unpair is from your headset. On your headset, select Settings, Experimental Feature, Turn Air Link off.
I have no audio when I launch into Air Link.
To recover audio, reboot the headset and relaunch Air Link
My Settings panel becomes blank on Air Link crash or ungraceful Air Link session termination
You may have to reboot the headset if the settings panel goes blank.
Max. bit rate values for AMD and NVIDIA GPUs are different
You can set up to a max. of 100 Mbps on AMD
You can set up to a max. of 200 Mbps on NVIDIA
My bitrate settings changes are not persistent across sessions
You'll always enter the Air Link session with default settings (Dynamic bitrate set to 100 Mbps); any changes to bit rate settings will not be persistent across Air Link sessions.
I'm unable to discover my PC.
Make sure that your network is set up correctly
Check that both your PC and headset are on the same local network and neither of them is on the VPN
Make sure that your firewall is not blocking the TCP port 5669
Try turning on/off the Air Link button on the Oculus PC app
Reboot your headset and restart your PC software