Ipad uses the Touch OSC application which communicates through wireless networks using the OSC protocol to control Igloo Applications running on an Igloo Media ServerIgloo utilises the third-party application TouchOSC (Developed by Hexler) to control the various Igloo applications over the OSC messaging protocol. Adding new/updated TouchOSC layouts will need to be synced from the media server for layout updates. Please allow UDP 8000-8020, 9000-9020, 10000 inbound \ outbound connection in the firewall settings. Make sure two way communication is possible for Ipad remote devices to be able to send and receive OSC messages from media server.
...
Port | Scope | Description |
UDP 9000-9020, 10000 Inbound\Outbound | Igloo Network - Required Required Outside Network - Optional | OSC Protocol |
UDP 8000-8020 Inbound\Outbound | Igloo Network - Required Required Outside Network - Optional | OSC Protocol for syncing layouts from touch osc editor |
TCP & UDP 3001, 8086, 8080 Inbound\Outbound | Igloo Network - Required Outside Network - Not Required | Node.js services for streetview, IglooVC, GeoCV |
Igloo Media server details are shown below.
Host Name | Machine IP | Machine Address | Scope | Description |
mediaServerName | 10.128.104.192 136.186.118.11 (x.x.x.x)/dhcp | mediaServerName.domain.com | Igloo Network, Outside (optional) | OSC Protocol |
Instructions
The following are the step guide to test the toucOSC layout updates are working or not. is a guide to putting new layouts on a remote device using TouchOSC Editor’s sync function:
Open the TouchOSC Editor application in the media server.
Select a touchOSC file by clicking on open button > navigate to the path “C:\igloo\TouchOSC” or “C:\ProgramData\Local\Igloo Vision\IglooWarper\touchOsc\IglooTabletControl-2x2-v1.16.1.4.touchosc”selecting Open and navigating to the file to be synchronised with the remote device. Sample files can be found in the Warper’s install folder.
Select the sync button in the TouchOSC application and pop-up window will appear stating about layout add to the TouchOSC device/ Ipadwith instructions.
Open the TouchOSC application in Ipad on the remote device and tap on circle button that takes to opens the settings page.
Tap the layout in the application
Tap on the AddSelect layout and make sure the OSC address is the media server IP address.
Select add (IOS)/add from editor (android)
Media server name appears under the found hosts and tap on that.
The new layout appears and tap on that which will be selected as TouchOSC layout.
Verify new layout is working
Run the Igloo Warper and Igloo control application (both in start menu) on the media server.
Clicking on the Clips tab of the TouchOSC app and clicking on Bank>1should populate the clip banks in TouchOSC with the filenames of any clips loaded into Igloo Control. If you are not able to get to see the clip bank names that means the remote device is unable to receive information from the media server.
...