This guide goes through the build process for a server rack or flight case for installations and events.
...
Screwdriver set (preferably an IFIXIT kit.)
Cage nuts
(Avoid using power tools.)
The Basics
Servers Rack
A server rack is a metal frame that contains rack mounting rails. These a typically used for static installations.
...
Now fit the Dell rails, they click in on the front and back.
(Make sure to fit it close to the bottom on freestanding/mobile racks. A high centre of gravity could cause the rack to tip over.)
It’s important to note that you need to attach them on the U rather in the middle of a U.
...
Airflow. Do you need to leave a 1U gab above and below the item you’re installing for adequate cooling ?
Try to keep the centre of gravity as low as possible in freestanding/mobile racks.
What is the item I’m fitting doing ? Does it need to be closer to any of the other components being installed ? E.G. A Blustream C66 is usually located closer to the media server as the signal output from the server is going directly to it.
Is the rack being shipped to site ? Some items like the Blustream HDBT converters (C66,C88) have low quality mounting ears, which lend themselves to bending during transit. So consider attaching the ears but shipping them in the box they came in.
The rack mounted power gang usually goes on the back rail.
...