Software Required | Version (if applicable) | Icon |
|---|---|---|
Igloo Touch | 1.1 3.2 (DEV) |  |
Igloo Controller Service |
...
Igloo Touch, in parallel with the Igloo Controller service, is an IOS only iOS and Android tool that can be used to remotely control many aspects of an Igloo Vision system. There are 3 main applications it targets:
...
The Controller tab provides emulation of an Xbox 360 game controller - so chosen to ensure support with old and new Igloo camera packages for Unity and Unreal. The buttons emulate the buttons with the same labels found on the right hand side of the 360 game controller, typically used for interaction. The space above the buttons represent an emulated joystick, found on the left hand side of the 360 game controller, typically used for movement. The phone can also be rotated for a more ergonomic and gamepad-esque view.
...
...
Annotation:
The annotation page provides an interface for drawing on the Igloo Warper canvas.
...
Draw/Erase: Defines whether active annotations add to the annotation canvas or remove from them.
Capture: Allows for the movement and placement of capture windows behind the annotation layer, using the annotation cursor as a control point.
Below the Draw/Erase settings is the draw box. When pressed, either draw on the canvas at the position of the cursor (moved by gyroscope) or erase from the canvas at the position of the cursor.
...
Below the URL bar is a pad that, when clicked, sends a left mouse click to Igloo Web.
The directional pads send emulated arrow keys to Igloo Web
...
Left Arrow/Right arrow: Page back/Page forward.
Four Squares: Show tab selector.
Mouse Button Cluster: Positioned between the main click button and the keyboard/recentre icons, this cluster allows you to send standard mouse interactions such as left and right-click with the outer buttons and scrolling with a drag on the middle button.
Keyboard: Brings a keyboard onto the screen to send text to Igloo web.
Recentre Icon: Center the position of the cursor within the warper canvas. Used for calibrating the gyro. See here for the procedure.
Igloo Home Controls:
Go Igloo Home: Enables Igloo Home, mid content.
Recentre Icon: Center the position of the cursor within the warper canvas. Used for calibrating the gyro. See here for the procedure.
Refresh Icon: Will refresh Igloo Home. Useful as a troubleshooting step if you are not able to interact with Home, or the screen is not showing up.
Below the Go Home button is a pad that, when clicked, interacts with the currently hovered icon on Igloo Home.
...
Settings:
Web Cursor Speed: Increases the speed at which the cursor moves in Igloo Web
...
Warper Port: Communication receive port of the Warper. 9001 by default
Home Port: Communication receive port of the Warper. 9010 by default
Invert Gyro Y: Allows you to invert the direction of the y axis (vertical movement)
Show Virtual Controller When Clip On Controller Connected: Toggles the visibility of the virtual (onscreen) controller whenever a controller accessory is attached to the device.
| Info |
|---|
Service port is used for button presses. Warper port is for gyro |
...
Gyro Motion Settings: Shows This shows a readout of the current gyro position. Gyro can , as well as other pertinent information about the motion system. The gyro can also be enabled/disabled from this menu.
...
| Note |
|---|
Igloo Touch and any supporting Igloo Core Software releases are still in development. Anybody with early access to these builds should be aware that these builds may be unstable and may include some untested functionality. Please only install under guidance from an Igloo representative. |