...
Required Gigabit Ethernet on all network switch ports.
Required network switch backplane supports full throughput capacity required
Apply theses settings for the managed switch when possible:
DISABLE Quality of Service
DISABLE Jumbo Frames
ENABLE Flow Control as Asymmetrical or simply as On (required for TCP data transfer using versions prior to NDI® 3.5)
ENABLE IGMP Snooping if using multicast (mDNS is automatically blocked by many switches when snooping is enabled—refer to documentation from your switch vendor) •
CONFIGURE IGMP Querier and Query Interval for each switch in multi-switch networks when using multicast Firewalls & Port
mDNS/Bonjour must be accessible for automatic discovery of NDI®
Manual discovery requires access to port 5960 for the NDI® messaging server, and subsequent ports starting at 5961 for NDI® video streams
Open the TCP port in the network for NDI between the range 49152 to 65535.
Instructions
Using NDI studio Monitor, we can check the NDI audio-video devices output by the following steps
Go to media server and open the application “studio monitor”
Click on the menu while hovering over the top left corner of NDI window
Select NDI device like P100 camera or Birddog min.
After selecting the NDI device, the output should be visible.
...