...
Igloo Network - Network containing the Igloo related hardware i.e. media server, projectors, etc. This can be a separate VLAN, or mixed with a pre-existing network.
Outside - Corporate network or network providing internet access to the Igloo system. Can be behind NAT if only web and software updates are required. For sending OSC messages and / or NDI streams to the Igloo from this network, firewall rules must be in place to allow traffic through.
Inbound / Outbound - Inbound is assumed to be traffic directed at clients on the Igloo network, whereas Outbound is traffic leaving this network. This can be controlled by your gateway firewall, or intermediary security device. Windows Firewall settings on the media server itself should also match where required.
Port | Scope | Description | Source | Endpoint |
TCP 4352 Inbound TCP & UDP 3620 Inbound | Igloo Network | Projector communications and control. | IMP/Media Server | Projectors |
UDP 9000-9020, 10000 Inbound | Igloo Network, Outside (Optional) | OSC Protocol. | IMP/Media Server | Tablet |
TCP 49152 - 65535 Inbound | Igloo Network, Outside (Optional) | NDI Streaming. | IMP/Media Server | IMP/Media Server |
TCP 8086 | Igloo Network | Peruse-a-rue application. | ||
TCP 3000 | Igloo Network | Matterport application. | ||
TCP 3001 | Igloo Network | GeoCV application. | ||
TCP 10000 | Igloo Network | Igloo Controller Service. | Tablet/IOS device running Igloo Touch | IMP/Media Server running Igloo Controller Service |
TCP & UDP 53, 80, 443 Outbound | Outside | DNS, web connectivity and Windows updates. | ||
TCP 80, 443, 8200 Outbound | Outside | GoToMyPC Remote access. | IMP/Media Server | GoToMyPC |
TCP & UDP 5938 Outbound | Outside | TeamViewer Remote access | IMP/Media Server | TeamViewer |
UDP 162, 319-320, 2203, 4321, 14336-14600, 4440, 4444, 4455, 5353, 8700-8706, 8800, 8751, 16000-65536 Inbound | Igloo Network | Required if using Dante Audio and Controller. Allows audio routing, clocking, control, monitoring, and related services. See Dante Audio section below for a detailed description of these ports. | Dante Senders (Typically, IMP/Media Server, Dante enabled DSPs) | Dante Receivers |
Internet Connectivity
As shown in the above table, ports for web connectivity are optional but preferred for Windows Updates, remote support, and general usability. Windows Updates should generally be allowed and installed for security fixes, though a day should be set aside for larger cumulative and feature updates that may require post-install testing.
...