...
Open the TouchOSC application in the media server.
Select a touchOSC file by clicking on open button > navigate to the path “C:\igloo\TouchOSC” or “C:\ProgramData\Local\Igloo Vision\IglooWarper\touchOsc\IglooTabletControl-2x2-v1.16.1.4.touchosc”
Select the sync button in the TouchOSC application and pop-up window will appear stating about layout add to the TouchOSC device/ Ipad.
Open the TouchOSC application in Ipad and tap on circle button that takes to the settings.
Tap the layout in the application and make sure connection OSC ip is the media server ip.
Tap on the Add
Media server name appears under the found hosts and tap on that.
The new layout appears and tap on that which will be selected as TouchOSC layout.
Verify new layout is working and able to get information from media server.
Run the Igloo Warper and Igloo control application (both in start menu) on the media server.
Click on the Clips tab of the ToucOSC app and tap on Bank>1, now you will be able to see the clip names here. If you are not able to see the clip bank names that means network communication is not working. If you tap on the one of the clip bank tiles it will trigger the media files on the igloo Warper that means TouchOSC is sending the commands successfully, but if you are not not able see tiles names and trigger working on Igloo Warper that means TouchOSC not able to receive commands.
...